Static Control Products
UltraComfort ESD Bench Top Matting
Mechanical Shock Protection in Concert with Premium ESD Control Properties. Proudly Made in the U.S.A. Red Hot Special on this product in Blue!
Rolls eligible for Free Shipping in the Continental USA! New! Common point ground cord included at NO CHARGE with ESD Mat Kits made from this workbench material! Special Pricing on the Blue UltraComfort that totally blows away all of the ESD mats on Amazon! Call for Quantity Discounts!
United SCP's UltraComfort is a Mission Critical ESD bench top matting consisting of a thin, static dissipative top layer that is heat fused to a static conductive inner scrim. This scrim is bonded to a soft cushion of antistatic expanded foam.
This combination provides enhanced mechanical shock protection and permanent static control conductivity. Circuit boards and other items sink into the mat for better contact and improved charge decay.
UltraComfort (PN 167-AS) may be used to work in concert with constant monitors (push and cinch snaps recommended). It is easy to keep clean and warranted for lifetime static control properties. Unlike many ESD bench mats UltraComfort is NOT dependent on ambient humidity for its outstanding static control performance.
UltraComfort is a Mission Critical Tri-Layer ESD Matting. Take a look at its constuction. A Tri-layer mat provides a highly conductive inner scrim sandwiched between layers of less conductive material. This "static dissipative" construction is what slows and controls the discharge and allows the electrostatic potential to disperse evenly across the entire mat and to a ground source.
Compare our cost on UltraComfort and you'll be pleasantly surprised with the value United brings to the table on this outstanding material. Act now and get free shipping on rolls of this material to anywhere in the Continental U.S.A. THIS is a material you can count on! UltraComfort never fails an ESD Audit while providing static control performance designed for THE most demanding of scenarios.
Cushioning properties reduce mechanical shock and vibration
Abrasion resistant top layer
Advanced Tri-Layer Constuction
Ultimate static control performance
Lifetime Warranty on compliance to ANSI/ESD S20.20-2021!
Thickness: >.125" (1/8")
Available Widths: 24", 30", 36", 48"
Lengths: Custom cuts, 1' to 50' (all widths)
Rolls Lengths: 50' & 100' (all widths)
ANSI/ESD STM4.1-2017: >1.0E06 and <1.0E09.
NOTE: For best results ground ALL 3 layer ESD Mat with push and cinch connectors.
Tri-Layer Mission Critical ESD Bench Top Mat. Part Number 167-AS
Potential Accessories for this ESD Matting Material
Common Point Bench Mat Ground Cord - Our 113 AS snaps on a male 3/8 ground lug and has 2 inputs for wrist straps. It's important to have your mat and wrist straps grounded to the same location and this robust common point takes care of business. Includes the universal mat snap kit and installs with just a screw driver. $5.20 each (even less with quantity discounts).
ESD Constant Monitor - Our DT-020 Test the continuity of this matting material AND your wrist straps minimum and maximum resistance values every second of the working day! Catch problems IMMEDIATELY! $73.33 (even less with quantity discounts).
Push and Cinch Male - 3/8" - The ultimate in a secure ground connection. Pierces all layers for ultimate conductivity. Excellent for use with constant monitors, robust and fully compliant. Bag O' Tens, $6.20 per bag
ESD Mat Cleaner - Leaves Zero Insulative residues! Keeps table top and floor matting supple and helps rejuvenate the ESD mat's conductivity. Environmentally friendly, economical and Made in the USA! Available in quarts, cases, gallons and 5's! 1 quart WITH trigger sprayer, $9.99
Tame the Static Beast Before it Takes another Byte!
© 1996 - 2023 All rights Reserved
This page last Updated on