ElectraStrip rapidly dissolves multiple layers of ESD floor finish, allowing in some applications for removal without the use of floor machines or stripping pads. Formulated completely from top quality water miscible solvents, ElectraStrip contains less than 1% solids at concentration, so it leaves no alkaline residue to adversely effect subsequent finish applications. Routine stripping of three to five layers of ESD finish may be accomplished with nothing more than a mop and wet vacuum. ElectraStrip is designed for the removal of heavy build-ups of today's UHS, urethane fortified and metal cross linked ESD floor finishes. Years of buildup can be quickly and easily removed by light agitation with a scrubbing machine and standard stripping pad. ElectraStrip will even dissolve the almost impossible to remove straight acrylic sealers. Formulated for floor care professionals whose time is at a premium. Biodegradable??? YES

 

HOME

ELECTRASTRIP MAIN PAGE

MORE ESD FLOOR CARE PRODUCTS


MSDS SHEET

PN: E-Strip, ESD Floor Wax Stripper                  
            Material Safety Data Sheet
___________________________________________________________________
  
SECTION I - IDENTITY  
___________________________________________________________________
                                       PN: E-Strip,  ESD Floor wax stripper 
United ESD.com Inc
POB 19252, 4878 Lakeview Cir
Colorado City, CO, 81019
United States of America
                   
Hazardous -   YES
Health :   2   
Flammability:  0 
Reactivity:  0   
Personal Protection: B  
 Telephone Number for Information      ------------------------------------
   (719) 676 3928                                4 = Most Hazardous
 Date Prepared                         Emergency Phone Number
  03/28/03                           1-800-255-3924 or Poison Center
 Prepared ByA. Vadasz           
__________________________________________________________________
  
SECTION II - HAZARDOUS INGREDIENTS
__________________________________________________________________
          Hazardous Components    PEL    TWA   STEL   Other Limits    %
             CAS Reg#            ppm    ppm    ppm                  (opt)
 *2-BUTOXYETHANOL   # 111-76-2    50     25                     < 30 
 ETHANOLAMINE       # 141-43-5     3      3      6                  < 20 
                                                                         
*LISTED CHEMICAL SUBJECT TO REPORTING REQUIREMENT OF SCT.313 OF TITLE III. 
_________________________________________________________________
  
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
_________________________________________________________________
  Boiling point          - 215F    Specific Gravity(Water=1)         - 0.985
  Vapor Pressure (mm Hg) - 16.0    Melting Point                     - N.A.
  Vapor Density (air=1)  - 1.2     Evaporation Rate(Butyl Acetate=1) -0.25
  Viscosity (CPS)        - 12.5    Decomposition Temperature        - NA.
  Auto Ignition Temp.    -  NA.    Solubility in Water    -COMPLETE            
  pH - 12.2 +/- 5                                                              
  Appearance and Odor  -THIN, YELLOW LIQUID, DETERGENT ODOR                  
_________________________________________________________________
  
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
_________________________________________________________________
  Flash Point  - ABOVE 200 F TCC           Flammable Limits 
                                            LEL - N.A.      UEL - N.A. 
  Extinguishing media  - WATER SPRAY                                          
                                                                              
  Fire Fighting Procedure - COOL CONTAINERS WITH WATER                       
                                                                              
  Fire and Explosion Hazards - CLOSED CONTAINERS MAY BURST WHEN EXPOSED TO  
     EXTREME HEAT. ISOLATE FROM HEAT, SPARKS AND OPEN FLAME.   
___________________________________________________________________
  
SECTION  V - REACTIVITY DATA
___________________________________________________________________
  Stability - STABLE         
  Conditions to Avoid - N.A.                                                    
                                                                               
  Incompatibility - ACIDS, STRONG OXIDIZERS                                  
  Hazardous Decomposition or Byproduct - THERMAL DECOMPOSITION MAY YIELD     
                                           CARBON MONOXIDE                     
  Hazardous Polymerization - WILL NOT OCCUR 
  Conditions to Avoid - N.A. 
                                                                         
Medical Conditions Aggravated  - SENSITIZED SKIN, RENAL DEFICIENCY         
                                                                               
Emergency and First Aid Procedures - 
WASH CONTACT AREAS WITH PLENTY OF WATER:15 MINUTES. 
INGESTION: GIVE MILK, WATER OR CITRUS JUICE, INDUCE VOMITING (with Ipec)
MOVE SUBJECT TO FRESH AIR. CALL PHYSICIAN IMMEDIATELY 
__________________________________________________________________
  
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
__________________________________________________________________
 Steps to be Taken in Case Material is Released or Spilled - DIKE AND
COLLECT MATERIAL INTO PLASTIC CONTAINER. WATER RINSE AND DRAIN,
FLUSH SMALL AMOUNTS. (BIODEGRADABLE)                                            
Waste Disposal Method  - USE SANITARY LANDFILL DISPOSAL. 
(NOT A HAZARDOUS WASTE) FOLLOW STATE AND LOCAL REGULATIONS (RCRA; SUBTITLE D)              
                                                                               
Precautions to be Taken in Handling and Storage - 
DO NOT MIX WITH OTHER CHEMICALS.  AVOID PROLONGED CONTACT. 
KEEP FROM FREEZING AND EXCESSIVE HEAT. 
 Other Precautions  - STORE IN SECURE AREA. AVOID FOOD CONTAMINATION. 
AVOID PROLONGED INHALATION OF VAPORS. KEEP OUT OF REACH OF CHILDREN !   
__________________________________________________________________
  
   SECTION VIII - CONTROL MEASURES
_________________________________________________________________
  Respiratory Protection - NOT REQUIRED WITH NORMAL USE                       
                                        IN WELL VENTILATED AREA                
  Ventilation    Local Exhaust - RECOMMENDED                                   
                 Mechanical    - REQUIRED: EXCHANGE EVERY 10-15 MINUTES        
                 Special       - N.A.                                          
                 Other         - ASSURE FRESH AIR CIRCULATION.                 
 Protective Gloves  - REQUIRED: RUBBER, PLASTIC                              
 Eye Protection     - REQUIRED: SAFETY GLASSES, GOGGLES                      
 Other Protection   - RECOMMENDED: RUBBER OR PLASTIC APRON, SHOWER,          
                                   EYE WASH FACILITY                         
 Work/Hygienic Practices - DO NOT EAT,  DRINK NEXT TO MATERIAL.              
                             WASH HANDS/FACE AFTER WORK.                       
___________________________________________________________________
   
SECTION IX - TRANSPORTATION                49 CFR
___________________________________________________________________
 Unit Cont. -  55,30,5,1 GAL. PLASTIC CONT       Report Qty. (Lbs) -  NA.  
 OSHA -  NOT REGULATED                             Labels  - UN-CORROSIVE   
 DOT  -  NOT REGULATED                                              
 UN   -  NOT REGULATED                                              
                                                                           
DOT-NOT REGULATED                                                          
UN-NOT REGULATED                                                           
__________________________________________________________________
Vendor assumes no responsibility for injury to vendee or third person proxim-
ately caused if reasonable safety procedures are not adhered to as stipulated
in the data sheet. Additionally, vendor assumes no responsibility for injury
to vendee or third persons proximately caused by abnormal use of the material
even if reasonable safety procedures are followed. Further more, vendee
assumes the risk in use of the material.

 

United ESD.com INC

P.O.B. 19252, 4878 Lake View Circle

Colorado City, CO 81019

United States of America

Direct: 719.676.3928         Fax: 719.676.3929

ESD flooring,  Mats,  Chemicals,  ESD Ionizers, and Expertise

02/16/2007