|
Picture this: As the ESD
coordinator you're responsible for the esd compliance of lots of technicians, the ESD compliance your Company
counts on for successful product and reduced failure rate. Your highest priority
is controlling esd events at the numerous esd safe workstations located
throughout your facility. Are the operators wearing esd wrist straps,
are the straps functioning properly, are the table top esd mats fully
grounded? You're lucky, your Company is already using esd
constant monitors at each workstation saving you the headaches of
testing the mats and straps on a seemingly never ending basis. Yet you
walk tirelessly from station to station listening for the that little
beep that shows a faulty system. You hear it and it's gone. OR
you're unlucky. Your Company hasn't implemented the product protection
that ONLY constant monitors can provide. So you test and test and test
and document the results in a time consuming log book that looks like an
esd version of War and Peace!
|
 Easy
to Install, even easier to comprehend.
Automatic
ultimate supervision of failure events
Let's
technicians know you care;)
Fully
expandable, unlimited stations in groups
of 16
American
Made and Built to last a lifetime |
POWERFUL performance,
outstanding esd compliance verification. The NMS monitors
wrist strap and bench top performance from up to 3,000 feet away.
Each NMS provides inputs for up to sixteen DM9202's. If a
failure mode at any of workstations is detected the
9202 satellite provides a audible and visual alarm, sends a failure
signal to the NMS, logs the event and provides an unmistakable red
warning on your computer screen (and everyone's that is on the
network).
|
Standard System: 16 ea 9202
constant monitors for bench top and wrist straps.
16 ea network cable
assemblies.
1 ea Network monitoring
system hub.
1 ea laptop with specialty
software.
MSRP: $6,756
Additional 16 unit hub,
monitors and cables (without PC): MSRP $5,689. |
|
